2020 High quality Bell - Charging pile 7KW AC Wall-mounted Column type EV charging pile – Hawai
2020 High quality Bell - Charging pile 7KW AC Wall-mounted Column type EV charging pile – Hawai Detail:
working environment
The ambient air temperature during operationis -25.C~ 50.C. 24 h daily average temperature s 35°C;
Monthly average relative humidity s 90% (25.C), no condensation on the surface;
Atmospheric pressure 80kPa ~ 110kPa;
Installation vertical inclination s 5%;
The harsh level of vibration and impact of the place is s| level, and the extemal magnetic feld induction intensity in any direction is s1.5mT;
The use site must not have explosive atmospheres. The surrounding media does not contain harmful metals and conductive gases that damage the insulatin and conduct ecricityMedium, not alwed to be fll with water vapor and more serious mold;
The place of use should avoid direct sunlight. When istlling outdoors, it is recommended to install a shading faility for the charging pile;
When the user has special requirements, it can be resolved through consultation with our company.
Available in both vertical and wall mount versions;
AC220V AC input;
The main control board adopts a single-chip microcomputer with an embedded operating system. The charging mode is divided into four types: automatic full, fxed time, fxed amount, and fxed power. The RS-485 networking communication interface can be reserved and provided.
With GPRS networking mode.
The color touch screen display is 4.3 inch 480×272 resolution, and the charging mode can be set by touch button operation;
The single-phase electronic energy meter is used for electrical metering, and communicates with the main control board through the RS-485 interface;
Using a non-contact smart card reader, reading information about the IC card, communicating with the main control board through the RS-485 interface, and mastering
The board background program performs charger identity identification, userinformation recording, charging cost calculation, etc; the line switch adopts a switch with leakage protection function, and installs an emergency stop button;
The shape is made of sheet metal and part of ABS plastic structure.
The main technical parameters
| Detaled specifications | User Interface |
7KW single gun AC charging pile |
|
|
Charging equipment |
Installatiorf method |
Wall-mounted |
Column type |
| Way of routing |
Down and down |
||
| Dimensions |
292*126*417（mm） |
292*176*4131（mm） |
|
| Input voltage |
AC220V±20% |
||
| Input frequency |
50±10Hz |
||
| The output voltage |
AC220V±20% |
||
| Maximum output current |
32A |
||
| Cable length |
5m |
||
| Electrical index |
Level 0.5 |
||
| Electrical index | Current limit protection value |
≥110% |
|
| Voltage regulation accuracy |
/ |
||
| Steady flow accuracy |
/ |
||
| Ripple coefficient |
/ |
||
| effectiveness |
/ |
||
| Power factor |
/ |
||
| Harmonic content THD |
/ |
||
| feature design | HMl |
4.3 inch LCD display touch screen，LED indicator |
|
| Charging mode |
Auto full/fixed power/fixed amount/fixed time |
||
| payment method |
APP payment/credit card payment/scan code payment |
||
| Safety design | Safety standard |
GBT 20234、GB/T 18487、GB/T 27930、NBT 33008、NBT 33002 |
|
| security function |
Overvoltage protection,undervoltage protection,overload protection,short circuit protection,grounding prctection,over temperature protection, low temperature protection, lightning protection,emergency stop protection,leakage protection |
||
| Environmental indicators | Operating temperature |
-25℃~+50℃ |
|
| Working humidity |
5%~95% non-condensing cream |
||
| Working elevation |
<2000m |
||
| Protection level |
Level IP55 |
||
| cooling method |
Forced air cooling |
||
| Noise control |
≤60dB |
||
| MTBF |
100，000 hours |
||
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for 2020 High quality Bell - Charging pile 7KW AC Wall-mounted Column type EV charging pile – Hawai , The product will supply to all over the world, such as: London, Argentina, Rotterdam, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Olivia from Dominica - 2017.01.28 18:53
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Fernando from Pakistan - 2018.07.12 12:19
